Port and Shipyard Portal Crane for Sale
|FOB Price:||US $80,000-90,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $80,000-90,000/ Piece|
|Transport Package:||Wooden Case, Plastic Film|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: HC-TT
- Condition: New
- Name: Port and Shipyard Portal Crane for Sale
- Max. Load: 6t
- Max. Height: 150m
- Collor: According to Customers′ Requirement
- Tower Crane Type: Slewing Tower Crane
- Main Girder Form: Single Girder
- Moving Type: Wheel
- Trademark: Hercules
- Origin: Xinxiang, Henan
- Certification: CE, ISO9001: 2000
- Type: Portal Crane
- Tip Load: 1.3t
- Free Standing Height: 40m
- Warranty: 12months
- Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
- Sling Type: Wire Rope
- Power Source: Electric
- Installation: Assembled
- Specification: CE, CCC
- HS Code: 8426200000
Port and Shipyard Portal Crane for Sale
1. Products Introduction
Four Connecting Rods Marine Portal Crane
1. Power source is three-phase alternating current, rated frequency is 50HZ, rated voltage is 380V.
2. The temperature in the working environment should be in the scope of -20°C~+45°C and the relative humidity is no higher than 95%(with dew).
3. In-service, the wind speed should be no higher than 20 m/s; and out-of service, the wind speed should be (35-42) m/s.
4. The installation of the crane rail should accord with requirement of Jt5022.
Working in the Open-air, portal crane has been widely used in port, yard, station, stack and so on. In order to quicken the turnover of the vehicle, the operation of loading and unloading, transshipment of goods on the shipping and car needs high efficiency. With the advantage of advanced capability, high working efficiency, compact frame, calm movement, comfortable operation, safety and reliability, convenience maintenance, nice appearance and so on, it can make good use of the limited space of the port, yard and other places, and is available for empty and full loaded work of shipping and requirement of surface car transportation. And especially to general use port, it is a kind of hoisting machine with small investment and swiftness benefit for loading unloading front apron container, sundries and bulk cargo.
1. The working environment temperature is -25 °C ~ +45 °C.
2.Not applicable to explosive environment, fire danger carrier and places full of corrosive gas
3. Not lifting Melton metal, poisonous, flammable, explosive materials.
4. Please notice in advance when to grab underwater materials or special materials.
5. waterroof cloth is needed in out door operation.
1.Overload protection;Main lifting motor with thermal protection;Hooks with latch;Rubber buffers
2. Protective earthing;Crane switch and travel end switch.
3. Emergency switch can stop all movement when any dangerous happened.
4.All cranes must be preassmebled and tested before leaving factory and offer the certification of test.
The whole machines would be guaranteed for one year.Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer.
1.This type gantry crane characterized by its high quality, compact size, energy saving .
2. Easy to learn and easy to operate.
3. 30% increase in production upon using this machine .
4. It will pay back your investment in six months
2. Technical Specification
|Capacity ( Grab/ Hook)||t||10/16|
|Radius||Max.( Grab/ Hook)||m||33/25|
|Hoisting heighty||Above rail( Grab/ Hook)||18/25|
|Hoisting( Grab/ Hook)||m/min||60/45|
|Type of rail||P50|
|Power supply||3-phase 380V 50HZ|
As this kind of crane is customized, in order to offer you most suitable design and best solution, please confirm following information when you send inquiry.
1. lifting capacity.
2. span length.(rail center to rail center)
3. lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us supply the rails? How long is it?
5. Power supply: Voltage.Hz.Phase.
6. Working condition: which material to lift? temperature?
7. Would be better if you have drawings of your plant.
|Company||Henan Hercules Crane Machinery Co., Ltd.|
|Address||Room 20D, Building No.8, CBD Zhengdong District, Zhengzhou, Henan, China|