Free Standing 360 Degree Electric Jib Crane
1. Products Introduction
This jib cranes is a cost-saving addition to integrated handling systems. In some cases, this handling equipment is often the most economical solution. This applies to storage yards, on loading ramps or in buildings where other equipment cannot be installed due to structural limitations.
BZ Type Pillar Jib Crane (up to 1000 kg)
Slewing cranes feature high load capacities and outreach in relation to their deadweight. The low weight enables the jib to be moved easily and the use of hollow section rail as the crane girder provides for very low travel forces.
BZ Type Pillar Jib Crane (up to 2000 kg)
The light-weight design and low-headroom jib make this pillar-mounted slewing jib crane suitable for universal applications in the medium load range up to 2000 kg.
BZ Type Pillar Jib Cranes are also available in low-headroom design
The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernization measures or changes in the use of the building, our "short" units are the perfect solution in many cases.
1) mproved ease of operation
2) Maximum operating safety
3) Easy assembly
4) Delivery including complete electrical equipment
5) Lockable mains connection switch
The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and small wheel loads being transmitted to the crane runway!
Weight overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system, current overload protection system and so on!
Design and construction rules:
All the standards which are required for the crane are the Chinese standard.
Primer and finishing paint
Color: According to your demand.
Average thickness: About 100 microns.
Provide us with accurate measurement requirements upon ordering and we can offer the design and manufacture of non-standard products of various hoisting capacities and for various spans according to your special requirements.
2. Technical Specification
|Max. Lifting height||M||3||3||3||4||4|
|Max. Horizontal throw||M||2.6||3~4||2.9~3.9||3.8||3.7|
|Max. Radius of gyration||M||3.6||4~5||4~5||5||5|
|Max. Rotation moment||T/M||3||6||12||18||27|
|Angle of revolution||Degree||360|
|Angle of revolution speed||m/min||1||0.75||0.7||0.9||0.6|
Thank you for you patient reading. If you still have some questions about our products, our corporation or others, the following may help you.
1) What's the information should I provide when inquiry?
A: Lift capacity B: span C: lift height D: power source
The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.
2) How many operating methods for my selection?
Standard operating methods:
A: pendent controller with push buttons.B: remote control with push buttons
C: cabin(space capsule seat) control with joystick.Choose any type as you like.
3) Can this type work in hazardous environment?
That's Sure! This type product is just for application in general manufacturing workshop.For hazardous environment, please consult our professional sales manager.
We can customize for you, acid proof or explosion proof, no problem for that.
4) Can you provide the serious lifting tools?
That's sure! we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
5) How can we install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
5. Contact Us
|Company:||Henan Hercules Crane Machinery Co., Ltd.|
|Address:||Room 20D, Building No.8, CBD Zhengdong District, Zhengzhou, Henan, China|